Throttle Position Sensor (TPS): Notes
THROTTLE POSITION SENSOR (TPS) RESISTANCE
| Application | Ohms | |
|---|---|---|
| Between Terminals "C" & "D" | ||
| With .012" (.30 mm) Clearance At Stop Screw | 0-500 | |
| With .035" (.89 mm) Clearance At Stop Screw | Infinity | |
| Between Terminals "A" & "C" | 3500-6500 | |
| Between Terminals "B" & "C" | ||
| At Idle | 0-2000 | |
| At Wide Open Throttle | 3500-6500 | |
CAUTION:
DO NOT
attempt to adjust throttle stop screw to adjust idle. Throttle stop screw is factory-set, and is used as zero reference point for all other adjustments.
CAUTION:
DO NOT
adjust DOHC throttle stop screw to adjust idle. Throttle stop screw is factory-set, and is used as zero reference point for all other adjustments.