LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1994 >> Swift GA, 2D Hatchback, Standard >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Diagnosis & Overhaul - EEC/MX1 >> Component Disassembly & Reassembly >> Direct Clutch >> Disassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Direct Clutch: Disassembly

  1. Measure height between snap ring and clutch flange. See Figure . Clearance should be .098-.120" (2.49-3.06 mm). If clearance is not within specification, replace clutch discs or plates.
  2. Remove clutch plate snap ring. Remove clutch flange, discs and plates. Using Spring Compressor (09926-98310), compress piston return springs and remove snap ring. See Figure . Excessive compression may cause spring seat to become distorted.
  3. Remove spring seat and return spring. Apply compressed air through clutch drum oil hole to remove piston. Remove inner seal from clutch drum and outer seal from piston.
scientia non olet · About LEMON Manuals