Power Mirror Motor
Disconnect power mirror harness connector. Using 12-volt power source, connect positive and negative leads to specified terminals. See appropriate POWER MIRROR MOTOR TEST table. SeeFig 1 . If power mirror motor fails any test, replace power mirror assembly.
POWER MIRROR MOTOR TEST (LEFT)
| Apply 12 Volts To Pin No. | Ground Pin No. | Mirror Operation |
|---|---|---|
| 2 | 3 | Up |
| 3 | 2 | Down |
| 1 | 3 | Left |
| 3 | 1 | Right |
POWER MIRROR MOTOR TEST (RIGHT)
| Apply 12 Volts To Pin No. | Ground Pin No. | Mirror Operation |
|---|---|---|
| 6 | 7 | Up |
| 7 | 6 | Down |
| 5 | 7 | Left |
| 7 | 5 | Right |