Park/Neutral Position Switch
Disconnect electrical connector at Park/Neutral Position (PNP) switch. Switch is located on side of transmission. Using ohmmeter, check for continuity between specified terminals in accordance with shift lever position. See PARK/NEUTRAL POSITION SWITCH CONTINUITY table. See Fig 1. Replace switch if defective. Install electrical connector.
PARK/NEUTRAL POSITION SWITCH CONTINUITY
| Shift Lever Position | Terminals No. |
|---|---|
| "P" | 5 & 6, 8 & 9 |
| "R" | 4 & 9 |
| "N" | 5 & 6, 7 & 9 |
| "D" | 3 & 9 |
| 2 | 2 & 9 |
| "L" | 1 & 9 |