LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1994 >> Sidekick JS, 2D Utility, Standard >> Repair and Diagnosis >> Suspension >> Front Suspension >> Suspension - Front >> Removal & Installation >> Steering Knuckle >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Knuckle: Installation

  1. To install, reverse removal procedure. Tighten all nuts and bolts to specification. See TORQUE SPECIFICATIONS . On 2WD models, coat spindle and knuckle mating surfaces with sealant. Tighten spindle bolts to 30-44 ft. lbs. (40-60 N.m).
  2. To complete hub-to-spindle shaft installation, refer to WHEEL BEARING & HUB  under REMOVAL & INSTALLATION. Tighten lock nut to specification. See WHEEL BEARINGS  under ADJUSTMENTS.
  3. On 4WD models, install the free-wheeling hubs. Refer to FREE-WHEELING HUB (4WD)  under REMOVAL & INSTALLATION. Check wheel alignment. See WHEEL ALIGNMENT SPECIFICATIONS & PROCEDURES article in WHEEL ALIGNMENT.
scientia non olet · About LEMON Manuals