LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1994 >> Sidekick JS, 2D Utility, Standard >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> General Servicing >> A/C Compressor Servicing >> NIPPONDENSO 10-Cylinder >> Shaft Seal >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Shaft Seal: Installation

  1. Apply clean refrigerant oil to compressor housing bore. Lubricate shaft seal with refrigerant oil and install in front housing. Lubricate seal plate and install in front housing.
  2. Install shaft key, snap ring, felt retainer and felt. With clutch plate installed, ensure air gap between clutch plate and pulley is .014-.026" (.36-.66 mm). If air gap is incorrect, add or remove shim(s) as necessary.
scientia non olet · About LEMON Manuals