All Models Except Tracker & "S/T" Series: Installation
WARNING: This page does not describe the selected car, but rather 53 other vehicles, including the 1994 GMC Yukon, 1994 GMC Vandura Special, 1994 GMC Vandura, 1994 GMC Sonoma, and 1994 GMC Safari. However, it is still accessible from the selected car via links, so may be relevant.
- Ensure plugs located in rear of bellhousing below transmission mounting bolt holes are tight and not damaged. Note location before removal. Install new plugs if plugs are damaged.
- Apply light coat of high-temp grease to main drive gear splines. Place transmission in high gear. To complete installation, reverse removal procedures. Torque bolts to specification. Refer to TORQUE SPECIFICATIONS (ALL EXCEPT TRACKER & "S/T" SERIES) .