LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1994 >> Sidekick JS, 2D Utility, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System - Rear Wheel >> Component Testing >> Pressure Limit Valve
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pressure Limit Valve

  1. Disconnect pressure limit valve connector. Check resistance of isolation valve solenoid winding between terminals No. 2 and 4 of pressure limit valve. See Figure . Resistance should be 3-6 ohms.
  2. Check resistance of dump valve solenoid winding between limit valve terminals No. 1 and 4. Resistance should be 1-3 ohms.
  3. Check resistance of reset switch across terminals No. 3 and 4 of limit valve. Resistance reading should be infinite. If resistance values are not within specification, replace pressure limit valve as an assembly.
scientia non olet · About LEMON Manuals