LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1994 >> Sidekick JS, 2D Utility, Automatic >> Repair and Diagnosis >> Steering >> Power Steering >> Steering System - Power Recirculating Ball >> Removal & Installation >> Power Steering Gear >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Steering Gear: Removal

  1. Clean steering gear. Remove coolant reservoir. Raise and support vehicle. Disconnect hoses at steering gear. Wire hoses aside to prevent fluid drainage. Cap hoses to prevent contamination. Install plugs on gear fittings to prevent contamination.
    NOTE: Before removing steering shaft coupler from stub shaft on gear assembly, mark location of coupler to shaft.
  2. Remove steering shaft coupler pinch bolt. Remove steering column-to-instrument panel bolts. Disconnect coupler from stub shaft by pulling column and shaft about 2.0" (51 mm) in toward cab.
  3. Remove pitman arm nut and washer. Using Puller (J-29107 ), separate pitman arm from shaft. Remove engine splash shield. Remove steering gear-to-frame bolts. Remove steering gear from vehicle.
scientia non olet · About LEMON Manuals