Modification Of Stop Light Switch (TS 007 11223)

WARNING: This page is about the Sidekick JLX, Automatic, which is a different variant/trim than selected.

Publication date: 1970-01-01
Reference number: TS 007 11223

MODIFICATION OF STOP LIGHT SWITCH

TECHNICAL SERVICE BULLETIN

Reference Number(s): TS 007 11223, Date of Issue:

MODIFICATION OF STOP LIGHT SWITCH

Model(s): All Suzuki Models (August 1993 Production And Later)

Section Title: All Models

Bulletin No.: TS 007 11223

Division: Automotive

Category: Technical

CONDITION

Modification of Stop Light Switch.

CAUSE

Factory modification.

This bulletin is to inform you of the modification of the Stop Light Switch which has been carried out since August 1993 production in Japan and October 1993 production in Canada. The Stop Light Switch "ON-OFF" shift point has been modified, as shown in Fig 1 .x

Fig 1: Stop Light Switch On-Off Shift Points

VIN RANGE

JS3TA01C_R4140172

JS3TA01V_R4140526

JS3TD03V_R4105946

JS3TE02V_R4100639

JS3JC31V_R4100033

JS4JC3lC_R4100167

JS2AA35S_R5100980

JS2AC35S_R5100005

JS2AA34S_R5100142

JS2AC34S_R5100322

JS2AE35S_R5101431

2S3TC01C_R6402742

Due to this modification, clearance "a" for stop light switch adjustment, is as follows:

STOP LIGHT SWITCH ADJUSTMENT

Adjustment should be made as follows when installing switch. Pull up brake pedal toward you and while holding it there, adjust switch position so that clearance between end of thread and brake pedal return cushion (shown as "a" in Fig 2 ) is within specification. Then tighten lock nut to specified torque.

Clearance "a" = 1.5-2.0 mm (0.04-0.07 in.)

Tightening Torque "(a)" = 10-15 Nm (1.0-1.5 kg-m, 7.5-10.5 lb-ft)

Fig 2: Stop Light Switch Adjustment

PARTS INFORMATION

Part Name	Early Part No.	Late Part No.	Qty	Spare Parts Supply
Stop Light Switch	37740-60A10	37740-60A20	1	Late only
Stop Light Switch	37740-61B00	37740-60B10	1	Late only
Stop Light Switch	37740-60D00	37740-60D01	1	Late only