Bolt Sequence

Apply engine oil to cylinder head bolts and tighten them gradually as follows:

1 Tighten all bolts to 35 Nm (3.5 kg-m, 25.0 lb-ft) according to numerical order in figure.

2 In the same manner as in 1), tighten them to 55 Nm (5.5 kg-m, 40.0 lb-ft).

3 In the same manner as in 1) again, tighten them to specified torque.

Tightening Torque:
8 Nm (6.8 kg-m, 49.5 lb-ft)