Differential Carrier Assembly Mount Replacement
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
PROCEDURE TABLE
| Callout | Component Name |
|---|---|
| Preliminary Procedure Raise the vehicle. Refer to LIFTING AND JACKING THE VEHICLE . |
|
| 1 | Left Rear Differential Mount Nut
CAUTION:
Refer to FASTENER NOTICE
. Tip: Support the rear differential with a jack stand. Tightening torque Tighten the nut to 121 N.m (89 lb ft). |
| 2 | Left Rear Differential Mount Bolt (Qty: 2) Tightening torque Tighten the nut to 29 N.m (21 lb ft). |
| 3 | Left Rear Differential Mount Bolt (Qty: 2) Tightening torque Tighten the nut to 29 N.m (21 lb ft). |
| 4 | Left Rear Differential Mount |