Removal Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Loose Area Of Reveal Molding

Courtesy of SUZUKI OF AMERICA CORP.

WARNING: Refer to GLASS AND SHEET METAL HANDLING CAUTION .

NOTE: The window reveal molding fills the cavity between the body and window. If the reveal molding is stretched or damaged, it cannot be reused and it must be replaced.

Lift up on the loose area of the reveal molding.
Clean the top edge of the window surface and the reveal molding with a 50/50 mixture of isopropyl alcohol and water by volume on a dampened lint-free cloth.