LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1994 >> Samurai >> Repair and Diagnosis >> Drivelines & Axles >> Locking Hubs >> Removal & Installation >> Automatic Locking Hubs >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Automatic Locking Hubs: Installation

  1. To install hub, reverse removal procedure. Ensure "O" ring is fitted in groove of hub body. Align key in hub body with groove in drive hub. If hub body does not fit easily on drive hub, rotate wheel during assembly.
  2. Install mounting bolts, and tighten to specification. See TORQUE SPECIFICATIONS at the end of this article. Ensure "O" ring is installed in hub cover prior to reassembly. Apply grease and sealing compound to oil seal correctly. See Figure .
scientia non olet · About LEMON Manuals