LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1994 >> Samurai >> Repair and Diagnosis >> Drivelines & Axles >> Locking Hubs >> Removal & Installation >> Automatic Locking Hubs >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Automatic Locking Hubs: Inspection

  1. After installation, check hub operation. Remove hub cover. With transfer lever in 4H or 4L position, drive vehicle forward 6.6 ft. (2 m). Ensure sliding gear is at outer edge of hub. See Figure .
  2. Place transfer lever in 2H position, and move vehicle rearward 6.6 ft. (2 m). Ensure sliding gear is in inward position and does not engage splines of hub body. Repeat process and ensure hubs operate correctly. If not, repeat installation process. Ensure "O" ring is in position, and install hub cover. Use oil filter wrench to tighten hub cover.
scientia non olet · About LEMON Manuals