LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1993 >> Swift GS, Standard >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts - Front >> Removal, Disassembly, Reassembly & Installation >> Axle Shafts - Front >> Reassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Axle Shafts - Front: Reassembly

  1. Grease outer drive joint fully. Position boot on shaft and fill inside of boot with about 3 ozs. (90 g) of grease. Install inner drive joint boot onto drive axle shaft. Install ball drive joint onto shaft, ensuring flat side of joint faces outer drive joint.
  2. Install snap ring into shaft groove. Fill inside of boot with grease. Attach boots using boot bands. Ensure boot band clamp end is bent in a reverse direction of rotation. If boots are distorted or dented, correct before installing on vehicle.
  3. To install center bearing and shaft, reverse removal procedure. Install circlip securely into groove of bearing support. Apply grease to oil seals.
scientia non olet · About LEMON Manuals