LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1993 >> Swift GA, 2D Hatchback, Standard >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Diagnosis & Overhaul - EEC/MX1 >> Component Disassembly & Reassembly >> Forward Clutch >> Disassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Forward Clutch: Disassembly

  1. Measure height between snap ring and clutch flange. See Figure . Standard clearance should be .079-.106" (2.01-2.68 mm). If clearance is not within specification, replace clutch discs or plates.
  2. Remove clutch plate snap ring. Remove clutch flange, discs and plates. Using Spring Compressor (09926-98310), compress piston return springs and remove snap ring. Excessive compression may cause spring seat to become distorted.
  3. Remove spring seat and return spring. Apply compressed air through input shaft oil hole to remove piston. Remove inner and outer seals from piston.
scientia non olet · About LEMON Manuals