LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1993 >> Sidekick JS, 4D Utility >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heater System >> Testing >> Blower Resistor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Blower Resistor

  1. Blower resistor is mounted in front lower blower motor housing. Disconnect wiring harness from resistor. Terminal identification numbers are molded into resistor block.
  2. On Sidekick, check resistance between terminals "H" and "LO". Resistance should be about 1.8 ohms. Check resistance between terminals "H" and "M1". Resistance should be about one ohm. Check resistance between terminals "H" and "M2". Resistance should be about 0.5 ohm. If resistance is not as specified, replace blower motor resistor.
scientia non olet · About LEMON Manuals