Removal & Installation
- Discharge A/C system using approved refrigerant recovery/recycling equipment. Remove front grille.
- On all models, disconnect refrigerant hose(s) from condenser fittings. Remove condenser fan and condenser. Plug hoses to prevent contamination.
- Remove hood latch and lock assembly. Disconnect fan motor wiring harness. Remove condenser, cooling fan and receiver-drier as an assembly. Remove cooling fan and receiver-drier from condenser.
- On all models, reverse removal procedure to install. When installing a new condenser, add 0.7-1 ounce of refrigerant oil. Evacuate and recharge system, and check it for leaks.