Rotary Vane: Nissan
- Before checking and adjusting oil level, operate engine at 1200 RPM. Set controls at maximum cooling and high blower motor speed for 10 minutes to return oil to compressor.
- Stop engine. Discharge refrigerant. See SERVICING PRECAUTIONS. Measure the amount of oil drained/discharged into refrigerant recovery/recycling equipment.
- Remove compressor from vehicle. Drain compressor oil from compressor drain plug and measure oil amount. Add this amount to amount drained in step 2), to obtain total amount drained.
- Fill compressor with total amount drained, using new oil. If any major components of the system were also replaced, determine the amount of additional oil needed. See COMPONENT REFRIGERANT OIL CAPACITIES (ZEXEL ROTARY VANE & 6-CYLINDER) table for specified amount.
COMPONENT REFRIGERANT OIL CAPACITIES (ZEXEL ROTARY VANE & 6-CYLINDER)
| Component |
Ounces |
| Condenser |
| Altima & Maxima |
2.5 |
| NX, Pickup, Sentra & 300ZX |
1.0-1.7 |
| Evaporator |
| Altima & Maxima |
2.5 |
| NX, Pickup, Sentra & 300ZX |
1.5-2.5 |
| Receiver-Drier |
| Altima & Maxima |
0.2 |
| NX, Pickup, Sentra & 300ZX |
0.5-0.8 |
| Refrigerant Lines |
1.0 |