Daytime Running Light (DRL) System Does Not Work
WARNING: This page is about a different car, the 1993 Suzuki Samurai. However, it is still accessible from the selected car via links, so may be relevant.
- Apply parking brake and stop engine. Turn headlights on and check high/low beam operation. If headlights do not come on, replace bulbs and/or fuses as needed.
- If headlights come on, turn switch off and start engine. Release parking brake and apply foot brake. Turn switch to OFF or parking light position. If instrument panel (DRL) indicator light does not come on, go to step 5 . If indicator light does not come on, go to next step.
- With indicator light on, apply and release parking brake, ensuring DRL controller makes a clicking sound each time. If no clicking sound is heard, replace DRL controller. See DRL CONTROLLER LOCATION table. If clicking sound is hear, check DRL resistor and its circuit. See DRL RESISTOR LOCATION table.
- If DRL indicator light is off, check for battery voltage at specified DRL controller terminals. With coupler connected to DRL controller check White/Red, Orange/Black, Brown/Yellow and Black/White terminals. If all terminals have battery voltage and DRL controller ground does not have voltage, replace DRL controller.
- For each wire terminal that does not have battery voltage, check circuit and related parts as necessary.