TPS Inspection (Swift SOHC)

Unplug TPS connector. Using ohmmeter, check resistance between terminals of TPS connector with proper shim thickness gauge inserted between throttle lever and throttle stop screw. See Fig 1 and Fig 2 . See THROTTLE POSITION SENSOR (TPS) RESISTANCE  table.

Fig 1: Inserting Shim Thickness Gauge (Sidekick MPI & Swift SOHC)

Courtesy of SUZUKI OF AMERICA CORP.

Fig 2: Throttle Position Sensor (TPS) Term. ID (Swift SOHC Shown; Sidekick MPI Is Similar)

Courtesy of SUZUKI OF AMERICA CORP.