Swift DOHC
- Ensure transmission is in Park or Neutral and parking brake is set. Start engine, and warm it to operating temperature. Turn all accessories off. Ensure idle speed is within specification. See IDLE SPEED SPECIFICATIONS
table under IDLE SPEED.
- Operate throttle lever to increase and decrease engine RPM while noting RPM at which dashpot rod contacts throttle lever. Adjust the dashpot adjusting screw to specified RPM at which dashpot rod should contact throttle lever. See Figure
and Figure
. Also, refer to the DASHPOT ADJUSTMENT
table.
DASHPOT ADJUSTMENT
| Application |
RPM |
| Swift DOHC |
3000-3400 |