LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1993 >> Samurai JL >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Throttle Position Sensor (TPS) >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Throttle Position Sensor (TPS): Installation

  1. If wiring harness was removed from connector, insert wires into connector.
  2. Install TPS so its adjusting holes slightly cover mounting bolt holes. See Figure . Turn TPS so mounting holes align. Install TPS mounting bolts and finger tighten only.
  3. Clamp wiring harness securely to side of throttle body. Connect negative battery cable. Adjust TPS. See ADJUSTMENTS article. Tighten TPS mounting bolts to specification. Refer to the TORQUE SPECIFICATIONS  table.
scientia non olet · About LEMON Manuals