LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1993 >> Samurai JL >> Repair and Diagnosis (Single Page) >> External Pages >> Different car >> Section 5 (Steering Columns) >> Removal & Installation >> Steering Column >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

WARNING: This page is about a different car, the 1993 Suzuki Swift. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable. Remove steering wheel, horn pad and combination switch. See STEERING WHEEL & HORN PAD  and COMBINATION SWITCH  . Unplug wiring connectors to steering column switches.
  2. Pull back floor mat at bottom of steering shaft and remove lower steering column cover. Remove steering shaft upper joint side bolt. See Fig 1 .
    Fig 1: Locating Steering Shaft Upper Side Bolt (Swift)
    G90D01280Courtesy of SUZUKI OF AMERICA CORP.
  3. Remove steering column mounting nuts. See Fig 2 . On A/T vehicles, remove backdrive cable from steering column assembly. Remove steering column. To install, reverse removal procedure.
Fig 2: Removing Steering Column Mounting Nuts (Swift)
G90F01281Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals