Valves & Valve Springs Specifications
WARNING: This page is about a different car, the 1993 Suzuki Swift. However, it is still accessible from the selected car via links, so may be relevant.
VALVES & VALVE SPRINGS SPECIFICATIONS
| Application | Specification | |||
|---|---|---|---|---|
| Intake Valves | ||||
| Seat Angle | 45° | |||
| Valve Head Thickness | ||||
| Standard | .039" (1.0 mm) | |||
| Service Limit | .024" (.6 mm) | |||
| Stem Diameter | ||||
| DOHC | .2152-.2157" (5.465-5.480 mm) | |||
| SOHC | .2742-.2748" (6.965-6.980 mm) | |||
| Valve Tip Maximum Refinish | .0197" (.5 mm) | |||
| Maximum Head Radial Runout | .003" (.08 mm) | |||
| Exhaust Valves | ||||
| Seat Angle | 45° | |||
| Valve Head Thickness | ||||
| Standard | ||||
| DOHC | .047" (1.2 mm) | |||
| SOHC | .039" (1.0 mm) | |||
| Service Limit | .028" (.70 mm) | |||
| Stem Diameter | ||||
| DOHC | .2142-.2148" (5.440-5.455 mm) | |||
| SOHC | .2736-.2742" (6.950-6.964 mm) | |||
| Valve Tip Maximum Refinish | .0197" (.5 mm) | |||
| Maximum Head Radial Runout | .003" (.08 mm) | |||
| Valve Springs | ||||
| Free Length | ||||
| DOHC Standard | 2.0079" (51.00 mm) | |||
| DOHC Limit | 1.9567" (49.7 mm) | |||
| SOHC Standard | 1.9409" (49.30 mm) | |||
| DOHC Limit | 1.8937" (48.1 mm) | |||
| Out-Of-Square | .079" (2.0 mm) | |||
| Valve Spring Preload: Lbs. @ In. (kg @ mm) | ||||
| DOHC Standard | 60.6-73.8 @ 1.67 (27.5-33.5 @ 42.5) | |||
| DOHC Service Limit | 56.6 @ 1.67 (25.7 @ 42.5) | |||
| SOHC Standard | 54.7-64.3 @ 1.63 (24.8-29.2 @ 41.5) | |||
| SOHC Service Limit | 50.2 @ 1.63 (22.8 @ 41.5) | |||