LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1992 >> Sidekick JS, 4D Utility >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> General Servicing >> A/C Compressor Servicing >> SANDEN 7-Cylinder Shaft Seal R & I >> A/C Compressor Servicing >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

A/C Compressor Servicing: Installation

  1. Install Shaft Seal Guide Sleeve (09977-21700) over compressor shaft. Dip seal in refrigerant oil and install seal on sleeve. Using seal remover/installer, rotate seal clockwise until seal is engaged. Remove seal remover/installer by turning it counterclockwise.
  2. Coat seal seat with refrigerant oil and install seal with seal seat remover/installer. Remove shaft seal guide sleeve. Install snap ring with beveled edge facing out. Install seal retainer felt ring using seal seat remover/installer.
  3. Install shaft key and clutch plate. Tighten shaft nut to 12-14 ft. lbs. (16-19 N.m). Using a dial indicator, apply voltage to clutch coil to check air gap between clutch plate and drive pulley. Ensure air gap is .016-.032" (.40-.80 mm).
scientia non olet · About LEMON Manuals