V5 5-Cylinder
- If system is operable, run for several minutes to stabilize system before performing repairs. Turn off engine. Discharge system and remove compressor. See SERVICING PRECAUTIONS at beginning of article. Remove drain plug. Drain and measure oil.
- If one ounce or more is drained, add same amount. If less than one ounce is drained, add 2 ounces of new refrigerant oil to compressor.
- If A/C components are replaced, add refrigerant oil to system. Add one ounce if condenser is replaced. Add 3.5 ounces if accumulator is replaced.
- When replacing a component which has caused a large refrigerant leak, add 3 ounces of new oil plus the required amount for the part being replaced. Add oil directly to part being replaced if possible. If oil cannot be easily added to part, add oil to accumulator.