LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1992 >> Sidekick JS, 2D Utility >> Repair and Diagnosis >> Suspension >> Front Suspension >> Suspension - Front >> Removal & Installation >> Steering Knuckle >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Knuckle: Installation

  1. To install, reverse removal procedure. Tighten all nuts and bolts to specification. See TORQUE SPECIFICATIONS table at end of article. On 2WD models, coat spindle and knuckle mating surfaces with sealant. Tighten spindle bolts to 29-43 ft. lbs.(39-58 N.m).
  2. To complete hub-to-spindle shaft installation, see WHEEL BEARING & HUB under REMOVAL & INSTALLATION. Tighten lock nut to specification. See WHEEL BEARINGS under ADJUSTMENTS.
  3. On 4WD models, install free-wheeling hub. See FREE-WHEELING HUB (4WD) under REMOVAL & INSTALLATION. Check wheel alignment. See SPECIFICATIONS & PROCEDURES article in the WHEEL ALIGNMENT Section.
scientia non olet · About LEMON Manuals