Jaguar XJ6
- Discharge system. See SERVICING PRECAUTIONS at beginning of article. Determine angle at which compressor is mounted. Clean area around filler plug and remove plug slowly.
- Insert compressor dipstick diagonally until stop on dipstick contacts filler plug surface. See Figure. Remove dipstick and note oil fill level. Each increment on dipstick represents one ounce of oil.
- Determine amount of oil needed according to mounting angle. See COMPRESSOR OIL INCREMENT CAPACITIES (SANDEN 7-CYLINDER) table for specified amount.
- If necessary, correct compressor oil level. Install compressor oil plug, and tighten it to 72-108 INCH lbs. (8-12 N.m). Evacuate and recharge A/C system. Perform leak test.
COMPRESSOR OIL INCREMENT CAPACITIES (SANDEN 7-CYLINDER)
| Mounting Angle (In Degrees) | Oil Level In Increments |
|---|---|
| 0 | 2-4 |
| 10 | 4-5 |
| 20 | 5-6 |
| 30 | 6-7 |
| 40 | 7-9 |
| 50 | 8-10 |
| 60 | 10-12 |
| 90 | 12-13 |