Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Position a NEW throttle body gasket to the upper intake manifold.
Position the throttle body to the upper intake manifold.
CAUTION: Refer to FASTENER NOTICE .
Install the throttle body bolts.
Tightening torque

Tighten the bolts to 10 N.m (89 lb in) .

Fig 1: Identifying Engine Wiring Harness Electrical Connectors
Courtesy of SUZUKI OF AMERICA CORP.
Connect the engine wiring harness electrical connector (1) to the TAC module.
Install the air cleaner outlet duct. Refer to INSTALLATION PROCEDURE .