LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1992 >> Sidekick JS, 2D Utility >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Wiring Systems) >> Repair Instruction >> Sumitomo Connectors >> Terminal Replacement Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Terminal Replacement Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

After the terminal is crimped to the wire, perform the following procedure in order to replace the terminal.

  1. Slide the new terminal into the correct cavity at the back of the connector.
  2. Push the terminal into the connector until it locks into place. The new terminal should be even with the other terminals. Ensure that the terminal is locked in place by gently pulling on the wire.
  3. To assemble the connector, reverse the connector disassembly procedure.
scientia non olet · About LEMON Manuals