Shift Linkage: 5LM60
WARNING: This page does not describe the selected car, but rather 54 other vehicles, including the 1994 Geo Tracker, 1994 GMC Yukon, 1994 GMC Vandura Special, 1994 GMC Vandura, and 1994 GMC Sonoma. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect all shift rods from transmission shift levers. With shift control lever in Neutral position, insert a 1/4" diameter pin through alignment holes in shifter assembly.
- Align both shift levers on the transmission in the forward detent, and then move them back one detent. Loosen lock nuts on shift swivel ends, and align rod ends with shift lever holes.
- Install shift rods in levers, tighten lock nuts, and install lock pins. Remove alignment pin, and check for proper linkage operation.