Checking Fluid Level: Transaxle
WARNING: This page is about a different car, the 1989 Geo Tracker and 1989 Geo Prizm. However, it is still accessible from the selected car via links, so may be relevant.
- Engine must be at normal operating temperature. Park vehicle on level surface and apply parking brake. Place selector lever in the "P" (Park) position, start engine and allow engine to idle for 2 minutes. Apply brakes, shift through all gears and return selector lever to the "P" position.
- Remove dipstick. Fluid level should be in "HOT" or "FULL HOT" range. Add fluid if necessary. DO NOT overfill.