With Transmission Mounted Switch
WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 1987 GMC Vandura Special, 1987 GMC Vandura, 1987 GMC Value Van, 1987 GMC Suburban, and 1987 GMC Safari. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support vehicle and loosen switch mounting bolts. Align hole in switch lever with hole in switch assembly. Insert a .095" (2.5 mm) gauge pin through switch holes to hold switch in "N" position.
- With selector lever on transmission in "N" detent position, tighten switch mounting bolts and remove gauge pin. Lower vehicle and check operation of switch.