Component Disassembly & Reassembly: Governor: Reassembly
WARNING: This page does not describe the selected car, but rather 124 other vehicles, including the 1991 Chevrolet Pickup, 1991 Chevrolet Cab & Chassis, 1988 GMC Vandura Special, 1988 GMC Vandura, and 1988 GMC Value Van. However, it is still accessible from the selected car via links, so may be relevant.
Install valve in bore of sleeve, then install weights, springs, and thrust cap on sleeve. Align pin holes in thrust cap, weight assemblies, and sleeve. Install new pins. Crimp both ends of pin to prevent them from falling out. Check weight assemblies for free operation in sleeve. Ensure valve is free in sleeve.