Removal Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Remove the inner rear door trim panel. Refer to REAR SIDE DOOR TRIM PANEL REPLACEMENT .

Fig 1: Identifying Front Side Door Window Belt Inner Sealing Strip
Courtesy of SUZUKI OF AMERICA CORP.
Remove the inner belt seal. Refer to REMOVAL PROCEDURE .
Remove the rear door water deflector. Refer to REAR SIDE DOOR WATER DEFLECTOR REPLACEMENT .
Remove the door frame appliques. Refer to FRONT DOOR FRAME APPLIQUE REPLACEMENT .

Fig 2: Identifying Window Regulator Guide Plate
Courtesy of SUZUKI OF AMERICA CORP.
Lower window to access the window release tab.

Fig 3: Identifying Window Run Channel Bolts
Courtesy of SUZUKI OF AMERICA CORP.
Remove the window run channel bolts and loosen the window run channel.
Depress the window release tab with a flat-bladed tool.
Pull the window out of the window regulator guide plate.
Slide the window down and out of the primary window run channels.
Remove the window through the door belt opening.