LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1991 >> Samurai JS >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Hood/Fenders/Doors) >> Repair Instructions >> Rear Side Door Window Channel Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Window Weatherstrip Run Channel Assembly (1 Of 2)
G04844644Courtesy of SUZUKI OF AMERICA CORP.
  1. Lower the rear door window.
  2. Remove the rear door trim panel. Refer to REAR SIDE DOOR TRIM PANEL REPLACEMENT .
  3. Remove the inner belt seal. Refer to REMOVAL PROCEDURE .
  4. Starting at one end, carefully pull the window weatherstrip run channel assembly from the door frame.


  1. Remove the rear door window. Refer to REMOVAL PROCEDURE .
  2. Remove the rear door window weatherstrip run channel assembly. Refer to REMOVAL PROCEDURE .
    Fig 1: Identifying Rear Door Window Run Channel & Seal (1 Of 2)
    G04844646Courtesy of SUZUKI OF AMERICA CORP.
  3. Remove the bolts from the left and right sides.
  4. Remove the screw from the upper corner.
  5. Remove the rear door window run channel and fixed window assembly.
    1. Starting from the front corner of the door, remove the seal from the door header flange.
    2. Remove the seal assembly from the door.
scientia non olet · About LEMON Manuals