Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Rear Door Hinge To Body Bolts (2 Of 2)

Courtesy of SUZUKI OF AMERICA CORP.

With the aid of an assistant, position the rear door and loosely install all hinge to body bolts.
CAUTION: Refer to FASTENER NOTICE .
Align the hinge with the marks made during the removal procedure.
Tightening torque

Tighten the hinge to body bolts to 25 N.m (18 lb ft).
Install the rear door check link. Refer to INSTALLATION PROCEDURE .
Engage wiring harness grommet into door and install the rear door wiring harness.
Connect the wiring harness at the door jamb.
Verify the door is aligned properly. If door adjustment is required, refer to REAR DOOR ADJUSTMENT .