Installation Procedure
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
- Align the outer belt seal fastener location with the hole in the door structure and outer panel retaining tabs.
- Starting at the rear of the belt seal, push the belt seal down onto the flange until fully seated.
- Install the outside rearview mirror. Refer to INSTALLATION PROCEDURE
.CAUTION: Refer to FASTENER NOTICE .
- Install the outer belt seal retaining screw.
Tightening torque
Tighten the screw to 1.5 N.m (13 lb in).