Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Door Handle Cap

Courtesy of SUZUKI OF AMERICA CORP.

Install the gasket, if necessary.
Install the handle by placing into position and sliding rearward ensuring to engage the outside handle lever.
Install the door handle cap.

Fig 2: Identifying Door Handle Screw
Courtesy of SUZUKI OF AMERICA CORP.

CAUTION: Refer to FASTENER NOTICE .
Install the door handle screw through door shut face.
Tightening torque

Tighten the screw to 8 N.m (71 lb in).
Install the door handle bolt cap.