Door Inside Handle Replacement

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Door Inside Handle Assembly Bolts & Screw

Courtesy of SUZUKI OF AMERICA CORP.

DOOR INSIDE HANDLE COMPONENTS REFERENCE

Callout	Component Name
Preliminary Procedure Remove side door trim panel upper extension. Refer to UPPER EXTENSION TRIM PANEL REPLACEMENT (FRONT SIDE DOOR) . Remove side door handle trim bezel. Refer to DOOR HANDLE BEZEL REPLACEMENT . Remove side door trim panel. Refer to FRONT SIDE DOOR TRIM PANEL REPLACEMENT and REAR SIDE DOOR TRIM PANEL REPLACEMENT .
1	Side Door Inside Handle Screw (Qty: 2) Tightening torque 2.5 N.m (22 lb in) CAUTION: Refer to FASTENER NOTICE .
2	Side Door Inside Handle Bolt Tightening torque 2.5 N.m (22 lb in)
3	Side Door Inside Handle Assembly Tip: Disconnect electrical connector.
4	Side Door Locking Rod Assembly (Qty: 2) Tip: Use a flat-bladed tool to disengage rods from retaining clips.