Fastener Tightening Specifications - Exterior Trim
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
FASTENER TIGHTENING SPECIFICATIONS
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Door Frame Applique Screw | 2 N.m | 18 lb in |
| Front Fascia Center Grille Screw | 2 N.m | 18 lb in |
| License Plate Pocket Nut | 2 N.m | 18 lb in |
| License Plate Pocket Screw | 2 N.m | 18 lb in |
| Liftgate Center Applique Assembly Nuts | 4 N.m | 35 lb in |
| Liftgate Center Applique Assembly Screw | 2 N.m | 18 lb in |
| Liftgate Garnish Molding Nut | 4 N.m | 35 lb in |
| Liftgate Garnish Molding Bolt | 2 N.m | 18 lb in |
| Rear End Spoiler Bolt | 8 N.m | 71 lb in |
| Rocker Molding Screw | 2 N.m | 18 lb in |
| Windshield Frame Filler Panel Applique Screw | 2 N.m | 18 lb in |