Stabilizer Shaft Link Replacement

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Stabilizer Shaft Link Components

Courtesy of SUZUKI OF AMERICA CORP.

PRELIMINARY PROCEDURES REFERENCE

Callout	Component Name
Preliminary Procedures Raise the vehicle. Refer to LIFTING AND JACKING THE VEHICLE . Remove the front wheel and tire assembly. Refer to REMOVAL PROCEDURE .
1	Stabilizer Shaft Link Ball Stud Nut (Qty: 2) CAUTION: Refer to FASTENER NOTICE . Tip: Use the proper size allen wrench to keep the stabilizer link ball stud from rotate while removing or installing the nut. Tightening torque 65 N.m (48 lb ft) .
2	Stabilizer Shaft Link