Rear Output Shaft Housing Disassembly

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Rear Output Shaft Housing Components

Courtesy of SUZUKI OF AMERICA CORP.

CALLOUT AND COMPONENT NAME TABLE

Callout	Component Name
1	Transfer Case Rear Output Drive Gear Nut Tip: Use a 30 mm socket or J 29873. Special Tools J-08614-A Pinion Flange Holder and Remover
2	Transfer Case Rear Output Shaft Flange Special Tools DT-48146 Press Support
3	Transfer Case Rear Output Shaft Bearing Assembly Tip: Use a press to remove the output shaft from the housing.
4	Transfer Case Rear Output Shaft Bearing Spacer
5	Transfer Case Rear Output Shaft
6	Transfer Case Rear Output Shaft Oil Slinger Tip: Remove the slinger only if damaged. Refer to REAR OUTPUT DRIVE HOUSING CLEANING AND INSPECTION .
7	Transfer Case Rear Output Shaft Seal Tip: Discard the seal after removal.