Ignition and Start Switch Replacement
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
CALLOUT COMPONENT NAME
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the ignition lock cylinder case. Refer to IGNITION LOCK CYLINDER CASE REPLACEMENT . |
|
| 1 | Ignition/Start Switch Bolt (Qty: 2)
CAUTION:
Refer to FASTENER NOTICE
. Tightening torque 2 N.m (18 lb in) |
| 2 | Ignition/Start Switch |