LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1991 >> Samurai JS >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Engine Mechanical) >> Repair Instructions >> Piston, Connecting Rod, and Bearings Cleaning and Inspection >> Connecting Rod Cleaning Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Connecting Rod Cleaning Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean the connecting rods in solvent.
    WARNING: Refer to SAFETY GLASSES CAUTION .
  2. Dry the connecting rod using compressed air.
  3. Remove the connecting rod cap and clean the threads.
  4. Remove the connecting rod bearing and discard. Never reuse a connecting rod bearing used in a running engine.
scientia non olet · About LEMON Manuals