LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1991 >> Samurai JS >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Engine Mechanical) >> Repair Instructions >> Camshaft Intermediate Drive Chain Idler Installation - Left Side (Third Design)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Intermediate Drive Chain Idler Installation - Left Side (Third Design)

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Camshaft Intermediate Drive Chain Idler Sprockets
G04842177Courtesy of SUZUKI OF AMERICA CORP.
  1. Ensure that the left camshaft intermediate drive chain idler (2) is being installed. The recessed hub (3) and the larger sprocket of the left camshaft intermediate drive chain idler is installed outward. The raised hub and the smaller sprocket of the left camshaft intermediate drive chain idler is installed towards the block.
    Fig 2: Identifying Camshaft Intermediate Drive Chain Idler & Bolt
    G04842178Courtesy of SUZUKI OF AMERICA CORP.
  2. Place the left camshaft intermediate drive chain idler to the cylinder block.
    CAUTION: Refer to FASTENER NOTICE .
  3. Install the camshaft intermediate drive chain idler bolt.

    Tightening torque 

    Tighten the camshaft intermediate drive chain idler bolt to 58 N.m (43 lb ft)  .

    Reference: SECONDARY CAMSHAFT DRIVE CHAIN INSTALLATION - LEFT SIDE (THIRD DESIGN) .

scientia non olet · About LEMON Manuals