Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Dash Panel Exhaust Heat Shield To Underbody

Courtesy of SUZUKI OF AMERICA CORP.

Position the dash panel heat shield to the underbody, installing the shield over the stud.
CAUTION: Refer to FASTENER NOTICE .
Install the dash panel heat shield nut.
Tightening torque

Tighten the nut to 10 N.m (89 lb in).
Install NEW rivets.
Lower the vehicle.