Idle Learn Procedure
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Ensure the above conditions are met before proceeding with this procedure.
- Do not perform this procedure if a throttle position (TP) sensor or other throttle actuator control (TAC) system DTCs are set other than P2176. The ECM will not perform the idle learn procedure with a DTC set.
- Turn OFF the ignition for 30 seconds.
- Turn ON the ignition, with the engine OFF for 60 seconds.
- Turn OFF the ignition.
- Turn ON the ignition, with the engine OFF.
- Clear the DTCs with a scan tool.